Due to large sales volumes all new orders are currently taking 4 weeks to dispatch. Thanks for your patience during this busy time!

SR Handlebar Mount for Pro 3
SR Handlebar Mount for Pro 3
SR Handlebar Mount for Pro 3
SR Handlebar Mount for Pro 3
SR Handlebar Mount for Pro 3

SR Handlebar Mount for Pro 3

Regular price $90.00 $70.00 Sale

The SR (Sealed Road) Handlebar Mount is designed to work with the Glider Pro 3 eco-system. The mount is articulated along the roll axis so that the stabilizer can be mounted upright on slanted handlebars. It also has the ability to confom over tapered handlebars too.

It's designed to fit a 25mm to 27mm handlebar. The handlebar clamp has a rubber sleeve to help prevent slipping and it has a locking thumbscrew as well.

We have over engineered this mount well and truly but please follow the precautions below:

Caution:

  • Please bare in mind that the SR stands for 'Sealed Road' and it shouldn't be used on dirt roads, off-road or any riding where significant shocks are being transmitted through to the handlebar. 
  • Be careful not to over-tighten the clamp bolts as these bolts can apply enough pressure to damage the mount. First tighten lightly and then mount your rig to it and then gently pull on the gimbal to see if the mount will rotate forward easily but be careful not to dislodge the rubber sleeve. Continue doing this until a force of over 10kg (22pounds) is needed to budge the mount.
  • Always secure your rig with a separate safety line to protect it in case of catastrophic failure. 
  • When not in use we suggest avoiding excessive UV light and inclement weather as this will reduce the mounts strength.

Specifications

Maximum Recommended 4th Axis Payload 4.5kg (10 pounds)

Operating Temperature Range

-18C to 80C (0F-180F)