The SR (Sealed Road) Poles Mounts is designed to work with the Glider Pro 3 eco-system. The mounts come in 3 different sizes to suit common car or set rigging poles as well as electric bikes and scooters.
25mm Pole Mount
Fits 24 - 28mm poles (7/8' to 1-1/8')
38mm Pole Mount
Fits 37 - 41mm poles (1-7/16' to 1-5/8')
50mm Pole Mount
Fits 49 - 53mm poles (1-15/16' to 2-1/8')
The Pole Mount clamps have a rubber sleeve to help prevent slipping and it has a locking thumbscrew as well.
We have over engineered these mounts well and truly but please follow the precautions below:-
Please bare in mind that the SR stands for 'Sealed Road' and it shouldn't be used on dirt roads, off-road or any riding where significant shocks are being transmitted through to the handlebar.
Be careful not to over-tighten the clamp bolts as these bolts can apply enough pressure to damage the mount. First tighten lightly and then mount your rig to it and then gently pull sideways on the gimbal to see if the mount will rotate easily but be careful not to dislodge the rubber sleeve. Continue doing this until a rotational force of over 10kg (22pounds) is needed to budge the mount.
Always secure your rig with a separate safety line to protect it in case of catastrophic failure.
When not in use we suggest avoiding excessive UV light and inclement weather as this will reduce the mounts strength.