The great thing about our new full size 4th Axis Gimbal Stabilizers is their adaptability to almost every handheld gimbal system with a range of adaptors to suit standard circular handles as well as a range of non-circular handle gimbals.
We currently have the following adaptors and over time more will be added including non-circular handles such as the Ronin-S (prototype at present) and the Tilta G2/G2X. The FlexInsert system allows direct attachment of most common gimbals in either 'upright' or 'inverted' positions. All other non-circular handle adaptors can also be inverted in seconds too.
Adaptor - suits circular handles sized:-
Small 24mm to 31mm (15/16" - 1 1/4")
Feiyu MG V2
Medium 29mm to 36mm (1-1/8" - 1-7/16")
Crane Plus, V2, V1, M, Moza Air and many more
Large 34mm to 41mm (1-5/16" - 1-5/8")
GoPro Karma *see note 3
X Large 41mm to 48mm (1-5/8" - 1 7/8")
Crane 2, Feiyu A2000, Ikan Pivot, IkanDS2-A, Axler WISP-20M
Non Circular Handle Gimbals - * See Note 1
DJI Ronin M and MX - Needs SmallRig Ronin Adaptor Plate * see Note 1 & Note 2
DJI Ronin-S (Currently only available as a prototype) * see Note 4
Bottom Mount with single 1/4-20 screw - suits most handheld gimbals * see Note 1
Bottom Mount with single 3/8" screw * see Note 1
Slotted Plate for custom mounts - 60mmX120mm (2.5"X5") * see Note 1
Tilta G2/G2X * see Note 1
The Non-Circular handle mounts all require the the X Large mount to attach them to the gimbal mount. The X Large mount can either be purchased separately on this page or when purchasing the Glider stabilizer. This can be as a complete upgrade set (X Large Set) or as it's separate parts; (Glider C2 Clamp, X Large FlexInserts)
The Ronin M and MX require you to have the SmallRig adaptor plate that can be found here at Amazon or at SmallRig.
Although the stabilizer will function down to 0.9 kg (2 pounds) the recommended base payload is 1.5kg (3 pounds). If you want to fly the GoPro Karma you'll need to add counterweights to the payload to achieve optimal smoothing. These 'counterweights' are inexpensive and can be purchased from photographic stores.
This mount has been designed from measurements supplied by a customer so until we get our hands on a Ronin-S to fully test it ourselves this will be available as a prototype. Currently there's quite a few responses that the fit is excellent!