SR Elbow Connector Mount for Pro 3
The SR (Sealed Road) Elbow Connector Mount is designed to work with the Glider Pro 3 eco-system. The mount has two rosettes at a 90 degree right angle to each other which gives greater degrees of positioning for the Cheeseplates, Handlebar and all other mounts that incorporate a rosette.
We have over engineered this mount well and truly but please follow the precautions below:
- Please bare in mind that the SR stands for 'Sealed Road' and it shouldn't be used on dirt roads, off-road or any where significant shocks are being transmitted through to the mount.
- Be careful not to over-tighten the bolts as these bolts can apply enough pressure to damage the mount. First tighten lightly and then mount your rig to it and then gently pull on the gimbal to see if the Elbow mount allows any play along each axis. Continue doing this until a force of over 10kg (22pounds) will not allow any significant play in this joint.
- Always secure your rig with a separate safety line to protect it in case of catastrophic failure.
- When not in use we suggest avoiding excessive UV light and inclement weather as this will reduce the mounts strength.
|Maximum Recommended 4th Axis Payload||4.5kg (10 pounds)|
Operating Temperature Range
|-18C to 80C (0F-180F)|